人类学学报 ›› 2009, Vol. 28 ›› Issue (03): 262-275.

• 人类学学报 • 上一篇    下一篇

三峡库区池坝岭旧石器遗址2007年发掘简报

马宁; 裴树文; 彭菲; 高星; 李国洪   

  • 出版日期:2009-09-15 发布日期:2009-09-15

A preliminary report on the excavation of the Chibaling Paleolithic Site in the Three Gorges Region

MA Ning; PEI Shu-wen; PENG Fei; GAO Xing; LI Guo-hong   

  • Online:2009-09-15 Published:2009-09-15

摘要: 池坝岭遗址位于三峡库区重庆市丰都县境内,埋藏于长江左岸第三级基座阶地内。2007年,该遗址经过首次抢救性发掘,发掘面积514m2, 出土石制品213件。石制品原料 系就地取材于河流阶地底部的河卵石;石制品类型包括石核、石片、石器和断块等;硬锤锤击法为剥片的基本方法;石器以大型为主, 毛坯多为完整石片和石核, 刮削器和砍砸器是主要类型;石器由硬锤直接加工而成且加工简单, 方向以正向居多, 加工部位多集中在单端或单边。石器工业面貌除具有中国南方旧石器时代主工业鲜明特点外, 石片和石片石器也占较大比例, 尤其是摔碰法的存在对探讨旧石器时代三峡地区和西南地区石器工业的关系提供了新的材料和线索。依地貌地层对比和已有的测年数据推断,池坝岭遗址的时代为中更新世晚期。

关键词: 中更新世晚期; 石制品; 摔碰法; 池坝岭; 三峡库区

Abstract: The Chibaling Paleolithic site, buried in the third terrace of the left bank of the Yangtze River in the Guanshitan village, Zhenjiang town, Fengdu County, Chongqing, was excavated from November to December, 2007 by the staff of Institute of Vertebrate Paleontology and Paleoanthropology (Chinese Academy of Sciences), as part of the salvage archeological project in the Three Gorges Region. 514㎡ was exposed during the excativions.
Five stratigraphic layers of the third terrace were identified at the site , with the total thickness of more than 10 meters. Archaeological materials were mainly unearthed from the 5th layer, a layer of alluvial pebbles, 2.0m —5.0m in thickness. A total of 213 stone artifacts were unearthed.
The stone assemblage includes cores (66), flakes (57), chunks (70) and retouched tools (20). The general features of these artifacts are summarized as follows:
1) Lithic raw materials exploited at the site were locally available from ancient riverbeds. More than five kinds of raw materials were utilized in core reduction and tool manufacture. They are silicarenite, quartzite, lava, volcanic breccia and hypabyssal intrusive rocks. Silicarenite is the dominant raw material used for producing stone artifacts at the site.
2) The principal flaking technique is direct hammer percussion without core preparation, followed by the anvil-chipping and throwing against anvil techniques ( Yangtze flaking technique).
3) Most stone artifacts (95.8 %) are large and medium in size.
4) Most blanks for tool fabrication are flakes. Most retouched tools are large in size.
5) Only four retouched tool classes are identified , namely scrapers , choppers, heavy-duty scrapers and cleaver.
6) Major blanks for tools retouch are complete flakes (40.0 %), followed by cores, incomplete flakes, pebbles and chunks.
7) Modified tools appear to be retouched by direct hammer percussion, mostly unificially retouched on the one end of the blanks.
The stone tool assemblage of the site shows close tie with the Pebble Tool Industry (Main Industry) in South China. Geomorphological and chronological comparison among the sites in the Three Gorges region indicates that the age of the site should be close to late Middle Pleistocene, which places the Chibaling industry to the Middle Paleolithic in China.

Key words: Late Middle Pleistocene; Stone artifacts; Throwing against anvil technique; Chibaling; Three Gorges Region